Powermeter Pairing - SRM X-Power User Manual

POWERMETER PAIRING

X-Power pedal PowerMeter supports ANT+
pair the X-Power pedal with your device. Depending on the device you might see one or more sensors. Select either
Bluetooth or ANT+ to connect your bike computer.
® ™
PAIRING VIA ANT+
™
Make sure both pedals are turned on when pairing to your
device. Search in the device for sensor menu, add/pair
sensor and if necessary choose power sensor. Via ANT+
only the drive side serial will be shown and needs to get
paired. The non-drive pedal (Slave) and drive side pedal
(Master) work as a distributed system and send all data incl.
power balance, etc. via the Master to your bike computer.
L
14
and Bluetooth
™
R + L
PAIR RIGHT SIDE ONLY
connections. To show data on your device you need to
®
PAIRING VIA BLUETOOTH
Make sure both pedals are turned on when pairing to your
device. Search in the device for sensor menu, add/pair
sensor and if necessary choose power sensor. When
™
adding sensors via Bluetooth
pedals separately. Make sure both drive and non-drive
pedals are added to get the correct measurements incl.
power balance.
®
you need to add both
®
R
L
PAIR BOTH SIDES
SEPARATE WITH DEVICE