Chapter 4 Tutorial
4.4.5 Configure the SERVER_2 Network
Next, you will configure the SERVER_2 network that allows Bob to access secure server 2
and the Internet.
To do this, repeat the procedure in
information.
Table 10 Tutorial: SERVER_2 Network Information
SSID Screen
Index
Profile Name
SSID Edit (SERVER_2) Screen
L2 Isolation
MAC Filtering
Layer-2 Isolation (L2Isolation04) Screen
Profile Name
Set 1
Set 2
Set 3
MAC Filter (macfilter04) Edit Screen
Profile Name
Set 1
4.4.6 Checking your Settings and Testing the Configuration
Use the following sections to ensure that your wireless networks are set up correctly.
4.4.6.1 Checking Settings
Take the following steps to check that the ZyXEL Device is using the correct SSIDs, MAC
filters and layer-2 isolation profiles.
1 Click WIRELESS > Wireless. Check that the Operating Mode is MBSSID and that
the correct SSID profiles are selected and activated, as shown in the following figure.
72
Section 4.4.4 on page
69, substituting the following
4
SERVER_2
L2Isolation04
macfilter04
L-2-ISO_SERVER-2
MAC Address: 77:66:55:44:33:22
Description: NET_ROUTER
MAC Address: 99:88:77:66:55:44
Description: SERVER_2
MAC Address: 66:55:44:33:22:11
Description: GATEWAY
MacFilter_SERVER_2
MAC Address: 22:33:44:55:66:77
Description: Bob
ZyXEL NWA-3160 Series User's Guide