Installation Considerations; After Unboxing Unit(S); Plugging In The Power Cable; Country Specific Ac Voltages - PS Audio Stellar M1200 Owner's Reference Manual

Installation
Location
Considerations
Once your new Stellar M1200 Amplifier is unpacked, you will need to find a convenient place
to set it. A good location for the Stellar M1200 Amplifier is in a cabinet or on a shelf at an easily
accessible height. The Stellar M1200 Amplifier and the Stellar Gain Cell DAC were designed to
stack on top of each other if they are not placed on separate shelves. Do not remove the feet.
Mounting
The Stellar M1200 should be placed with consideration of providing air circulation to the unit. If
you wish to install the Stellar M1200 into your component rack, the purchase of an aftermarket,
custom-designed shelf may be necessary.
Plugging In The
You may use either the provided power cable or an aftermarket power cable to connect your unit
Power Cable
to AC power. For best results, we strongly recommend the use of a PS Audio PerfectWave®
Power AC cable, or any high-quality aftermarket power cable. It is always preferable to feed your
equipment using an excellent power cable, as there will be a significant performance improvement
over the stock power cable.
Country Specific
The Stellar M1200 Amplifier, as with most PS Audio products, is country specific to its incoming
AC Voltages
AC voltage. This means the unit can only be operated at its preset voltage, such as 230 volts
for most of Europe and Asia, 100 volts for Japan, and 120 volts for the US and other similar
countries. Immediate damage can occur if you try and power the Stellar with a voltage it was not
designed to operate on.
®
Getting Started
Stellar M1200 Amplifier
6