Inventis TRUMPET User Manual page 21

2.2.1 Probes (REM)
Two probes are located at the ends of the REM headset. Detailed
description below:
A
B
A. Housing for probe tube
B. Probe tube
C. O-ring for attachment to ear
D. Reference microphone
It is advisable, where possible, to use the REM probes inserted
in the headset
Insertion of probe tube
The Trumpet comes with a set of probe tubes (REM licence). To insert this
accessory, position the blue part of the tube over the metal cylinder that
provides the housing for the tube (A in the illustration) and push in gently
until fully home.
Do not apply excessive force when inserting the tube, as this
could damage the actual probe microphone.
2.2.2 Wireless probes (REM)
Alternatively to the wired probes it is possible to use the wireless probes
for REM measurements:
F
D
C
E. Graduated scale
F. Guide housing for
insertion of tube
G. Probe calibration guides
G
E
15