Snmp Traps; Table 33-2 Snmp Traps; Table 33-3 Ports And Interface Types - ZyXEL Communications 650 Series User Manual

Prestige 650 Series User's Guide

33.4 SNMP Traps

The Prestige will send traps to the SNMP manager when any one of the following events occurs:
TRAP #
1 coldStart (defined in RFC-1215)
2 warmStart (defined in RFC-1215)
3 linkDown (defined in RFC-1215)
4 linkUp (defined in RFC-1215)
5 authenticationFailure (defined in
RFC-1215)
6 whyReboot (defined in ZYXEL-
MIB)
6a For intentional reboot :
The following table maps the physical port and encapsulation to the interface type.
33-4

Table 33-2 SNMP Traps

TRAP NAME

Table 33-3 Ports and Interface Types

PHYSICAL PORT/ENCAP
LAN port(s)
Wireless port
PPPoE encap
1483 encap
Ethernet encap
PPPoA
DESCRIPTION
A trap is sent after booting (power on).
A trap is sent after booting (software reboot).
A trap is sent when the port is down.
A trap is sent when the port is up.
A trap is sent to the manager when receiving any SNMP
get or set requirements with wrong community (password).
A trap is sent with the reason of restart before rebooting
when the system is going to restart (warm start).
A trap is sent with the message "System reboot by user!" if
reboot is done intentionally, (for example, download new
files, CI command "sys reboot", etc.).
INTERFACE TYPE
enet0
enet1
pppoe
mpoa
enet-encap
ppp
SNMP Configuration