STIEBEL ELTRON DNM 3 Operation And Installation page 32

INSTALLATION
Installation

f Undo the cover fixing screws by two turns. f
f Undo the snap fastener using a screwdriver. f
f Remove the appliance cover with the heater towards the f
front.
f Using pliers, break out the knock-out for the power cable f
in the appliance cover. Correct the contours with a file if
necessary.
32 | DNM


f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable
f Route the power cable through the cable entry in the back

f
f
rawl plugs and screws.


f
panel.


www.stiebel-eltron.com