Installation Of Microsd Card; Operation - Quer KOM0916 Owner's Manual

INSTALLATION OF MICROSD CARD

1. Insert the microSD card to the corresponding slot on
the side panel of the device. Pay attention to the correct
installation.
2. To remove the microSD card, press it gently and remove
it when it ejects from the card slot.
Notes:
• Do not insert and pull out the card using force.
• When the device is not in use, remove the microSD card
from the slot to prevent it from damage.
• When you insert the microSD card into the corre-
sponding slot and turn on the device, it will set the card
as a preset storage device. Please format it firstly.
AV/ HDMI output
Connect one end of AV/ HDMI cable to the corresponding
port on the device; connect the other end to the TV AV/
HDMI input to browse files.

OPERATION

EN
Turning on/off
Press Power button to turn on the device. Press and hold
Power button again to turn off the device.
Recording mode
Press OK button or connect the device to the car charger
16
Owner's manual