Voice Setup - ZyXEL Communications 802.11g Wireless ADSL2+ 4-port VoIP IAD P-2602HWNLI Quick Start Manual

2.1 Voice Setup

Note: You should have a voice account already set up.
Fill in the fields with information from your
voice service provider. Leave the default
settings in fields for which no information
was provided (except if otherwise
specified).
If you have a SIP account like
1234@VoIP-provider.com,"1234" would
be the SIP Number and "VoIP-
provider.com" would be the SIP Service
Domain.
This screen configures SIP account 1.
Select the check box if you have a second
SIP account that you want to use.
2.2 Regular Phone Line Configuration
When one of your VoIP accounts is registered, the P-2602HWNLI normally uses the Internet (not the regular
phone line) to make phone calls. Follow the directions in this section to make sure you can also use the
regular phone line while one of your VoIP accounts is registered.
Note: When the P-2602HWNLI does not have power, only the phone connected to the
PHONE 1 port can be used for making calls. Ensure you know which phone this is, so
that in case of emergency you can make outgoing calls.
In the main screen, click VoIP > PSTN Line (or ISDN Line if you want to configure for an ISDN phone).
PSTN (or ISDN) Line Pre-fix Number: If you want to make a
regular phone call after one of your VoIP accounts has been
registered you have to dial this number before you dial the
phone number.
Relay to PSTN (or ISDN) Line: Enter phone numbers for
regular phone calls (that do not use the Internet) that you
always want to dial without the prefix number. For example,
enter emergency phone numbers here.
Click Apply.
P-2602HWNLI Quick Start Guide
7