BOXLIGHT Studio Experience Matinee 1HD User Manual page 36

Computer Input
4 Choose one of the positions from the Mode 1 to 5 where you
want to store with the POINT UP/DOWN button, and press the
SELECT button. Select "Yes" with the SELECT button and
close the menu by pressing the SELECT button at the Quit.
5 To clear the adjustment parameters previously set, select the
Mode free with the POINT UP/DOWN button and press the
POINT RIGHT button. Choose the mode that you want to clear
with the POINT UP/DOWN button, and then press the SELECT
button. Select "Yes" with the SELECT button and close the
menu by pressing the SELECT button at the Quit.
The items that you can adjust are the following:
Fine sync
Adjust an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust
value.(From 0 to 31.)
Total dots
The number of total dots in one horizontal period. Press the POINT LEFT/RIGHT button and adjust number to match your
computer image.
Horizontal
Adjust horizontal picture position. Press the POINT LEFT/RIGHT button to adjust the position.
Vertical
Adjust vertical picture position. Press the POINT LEFT/RIGHT button to adjust the position.
Current mode
Press the POINT RIGHT button to show the information of the
computer connected.
Clamp
Adjust clamp level. When the image has a dark bar(s), try this adjustment.
36
To store adjustment data.
Vacant Mode This Mode has parameters being stored.
To clear adjustment data.
Shows values of "Total dots,"
"Horizontal," "Vertical," "Display
area H," and "Display area V."
Current mode
Quit
Press the POINT
RIGHT button at the
Current mode icon to
show the information of
the computer
connected.