YUKEN KOGYO ELDFG-01EH 10 Series Instruction Manual page 4

Always follow the safety precautions.
Never use the product in an explosive
atmosphere where flammable gases or
explosives are handled.
result in a fatal accident, such as fire or
explosion.
When handling the valve, pay attention not
to apply tension to the cable.
may cause malfunction due to cable
breakage.
Do not apply load to the cable.
Never touch the connector while the power
is on. Doing so may cause electric shock,
resulting in a fatal accident.
Do not step on or put any heavy object on
the product. Doing so may result in
damage to the product/equipment or injury
from collapse/falling.
DANGER
Doing so may
WARNING
Doing so
Cable
CAUTION
Foreign matter in hydraulic fluid may result
in malfunction of the product.
hydraulic fluid clean (NAS 1638 class 10 or
better).
The connector is not included with the valve.
Wire the valve correctly by using the
specified standard connector and referring
to the instructions for the connector.
the use of YUKEN's connector TK290457-1,
see the "Wiring" section of this manual.
Make sure of correct wiring!
Do not modify the product. Doing so may
prevent the product from achieving the
design performance
operation.
Valve characteristics may vary depending
on the load pressure and fluid temperature.
Make adjustments so that the valve can
accelerate, decelerate, and stop safely
across the entire range of operating
pressures and fluid temperatures.
- 3 -
Keep
For
Wiring location
and impair safe
EM-1359