English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications, and operations, refer to the instruction manual:
Component identification
Reception-in-progress indication (RX)
Hour hand
Function hand
• Day of week
• Summer time setting
(SMT ▼ (On) / ▽ (Off))
• Power reserve
Signal-reception-OFF
indication
Reception result
indication
(OK / NO)
Second hand
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Checking the power reserve
1.
Push the crown in to position
2.
Press and release the lower right button
The function hand indicates the power reserve amount.
Level
3
Indication
Duration
2 - 1 year
(approx.)
Power reserve is
sufficient.
Meaning
OK for normal use
3.
Press and release the lower right button
procedure.
H909 Abbreviated instruction
LON
Button
Button
NOU
Date indication
0 1 2
.
0
.
A
2
1
1 year - 16 days
16 - 10 days
Power reserve is
Power reserve is
OK.
getting low.
Charge immediately
to finish the
A
Checking the reception result of the satellite signal
1.
Push the crown in to position
2.
Press and release the lower right button
Area name / time
zone
The tail of the second hand indicates the result of the last reception.
Indication
B
OK
Minute hand
NO
• When the signal reception has been set to OFF following
Crown
signal reception (reception
signal-reception-OFF indication.
24-hour hand
3.
Press and release the lower right button
procedure.
A
Setting the world time
Checking the world time
Crown's position
1.
Push the crown in to position
2.
Press and release the upper right button
The second hand moves to point the area currently set.
3.
Press and release the upper right button
procedure.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
0
10 days or
shorter
Insufficient
charge warning
has started.
H909 instruction manual
.
0
Reception result
The reception was successful.
The reception failed.
OFF), the head of the second hand points the
.
0
.
A
Turning off the
to finish the
A
.
B
to finish the
B
1/4
Need help?
Do you have a question about the H909 and is the answer not in the manual?
Questions and answers