Citizen H950 Abbreviated Instruction

English
• This watch is solar-powered. Expose the dial to light and use it sufficiently charged.
• To see details of charging time, specifications, and operations, refer to the instruction manual:
Component identification
Hour hand
OK/NO:
Reception result
indication
Function hand
• Day of week
• Power reserve
• Summer time setting
(SMT ON/OFF)
Second hand
Date indication
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
Checking the power reserve
1.
Push the crown in to position
2.
Press and release the lower right button
The function hand indicates the power reserve amount.
Level 3
Indication
Duration
2 - 1 year
(approx.)
Power reserve is
sufficient.
Meaning
OK for normal use
3.
Press and release the lower right button
procedure.
H950 Abbreviated instruction
RX: Reception-in-
progress indication
Minute hand
Button
Crown
Button
24-hour hand
Area name / time zone
0 1 2
.
0
.
A
2 1
1 year - 16 days 16 - 10 days
Power reserve is Power reserve is
OK. getting low.
Charge immediately
to finish the
A
Checking the reception result of the satellite signal
1.
Push the crown in to position
2.
Press and release the lower right button
The tail of the second hand indicates the result of the last reception.
B
Indication
OK
NO
A
3.
Press and release the lower right button
procedure.
Setting the world time
Checking the world time
Crown's position
1.
Push the crown in to position
2.
Press and release the upper right button
The second hand indicates the current world time setting and the function
hand indicates the summer time information.
3.
Press and release the upper right button
procedure.
• It returns to current time indication automatically in about 10 seconds
without pressing the button.
Setting the world time
0
1.
Pull the crown out to position
The second hand indicates the current world time setting and the function
hand indicates the summer time information.
2.
Rotate the crown to select an area.
• Refer to
10 days or
of time zones and representative areas
shorter
setting.
• Each time you change the area, the time and date of the selected area is
Insufficient
shown.
charge warning
has started.
3.
Push the crown in to position
H950 instruction manual
.
0
Reception result
The reception was successful.
The corrected time is indicated.
The reception failed.
The time is not corrected and the previously set time resumes.
.
0
.
1
How to read indication of the world time setting
to finish the procedure.
0
.
A
to finish the
A
.
B
to finish the
B
and
Table
for the details of the time zone
1/3