LG F H/1 4 G6/G7 T/Q D(N)(W)(0-9)(H) Owner's Manual page 37

Table of Contents

Advertisement

Available languages

Available languages

Symptoms
Door does not open
Wash cycle time
delayed
Fabric softener
overflow
Softeners dispensed
too early
Dry problem
36
Reason
Once washing machine has
started, the door cannot be
opened for safety reasons.
If an imbalance is detected or if
the suds removing programme is
on, the wash time will increase.
Too much softener may cause an
overflow.
Too much softener may cause an
premature dispensing.
Check water supply tap.
Solution
• Check if the 'Door Lock' icon is
illuminated. You can safely open the door
after the 'Door Lock' icon turns off.
• This is normal. The time remaining shown
in the display is only an estimate. Actual
time may vary.
• Follow softener guidelines to ensure
appropriate amount is used. Do not
exceed the maximum fill line.
• Follow the guidelines provided by the
detergent manufacturer.
• Close the dispenser drawer slowly. Do not
open the drawer during the wash cycle.
• Do not overload. Check that the washing
machine is draining properly to extract
adequate water from the load. Clothes
load is too small to tumble properly. Add a
few towels.
• Turn off water supply tap.
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

F h/1 2 g6/g7 t/q d(n)(w)(0-9)(h)F h/1 0 g6/g7 t/q d(n)(w)(0-9)(h)F14w7qdn1hF14w8tdn0hF14g7qdn0hF14g6qdn2h ... Show all

Table of Contents