Cleaning the Dispenser Drawer
Detergent and fabric softener may build up in the
dispenser drawer. Remove the drawer and inserts and
check for buildup once or twice a month.
1
Remove the detergent dispenser drawer by pulling
it straight out until it stops.
• Press down hard on the disengage button and
remove the drawer.
2
Remove the inserts from the drawer.
• Rinse the inserts and the drawer with warm
water to remove buildup from laundry products.
Use only water to clean the dispenser drawer.
Dry the inserts and drawer with a soft cloth or
towel.
3
To clean the drawer opening, use a cloth or small,
non-metal brush to clean the recess.
• Remove all residue from the upper and lower
parts of the recess.
4
Wipe any moisture off the recess with a soft cloth
or towel.
5
Return the inserts to the proper compartments and
refit the drawer.
Tub Clean (Optional)
Tub Clean is a special programme to clean the inside of
the washing machine.
A higher water level is used in this programme at higher
spin speed. Perform this programme regularly.
1
Remove any clothing or items from the washing
machine and close the door.
2
Open the dispenser drawer and add anti-limescale
(e.g. Calgon) to the main wash compartment.
• For tablets put into the drum.
3
Close the dispenser drawer slowly.
4
Power on and then press and hold Intensive and
Crease Care button for 3 seconds. Then
be displayed on the display.
5
Press the Start/Pause button to start.
6
After the programme is complete, leave the door
open to allow the washing machine door opening,
flexible gasket and door glass to dry.
CAUTION
• If there is a child, be careful not to leave the door open
for too long.
NOTE
• Do not add any detergent to the detergent
compartments. Excessive suds may generate and
leak from the washing machine.
EN
will
31