LG F H/1 4 G6/G7 T/Q D(N)(W)(0-9)(H) Owner's Manual page 36

Symptoms
Water does not enter
washing machine or it
enters slowly
Water in the washing
machine does not drain
or drains slowly
Washing machine does
not start
Washing machine will
not spin
Reason
Water supply is not adequate in
that location.
Water supply tap is not
completely open.
Water supply hose(s) are kinked.
The filter of the supply hose(s)
clogged.
Drain hose is kinked or clogged.
The drain filter is clogged.
Electrical power cord may not be
plugged in or connection may be
loose.
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
Water supply tap is not turned on.
Check that the door is firmly shut.
Solution
• Check another tap in the house.
• Fully open tap.
• Straighten hose.
• Check the filter of the supply hose.
• Clean and straighten the drain hose.
• Clean the drain filter.
• Make sure plug fits tightly in wall outlet.
• Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem is
a circuit overload, have it corrected by a
qualified electrician.
• Turn on water supply tap.
• Close the door and press the Start/Pause
button. After pressing the Start/Pause
button, it may take a few moments before
the washing machine begins to spin. The
door must be locked before spin can be
achieved. Add 1 or 2 similar items to help
balance the load. Rearrange load to allow
proper spinning.
EN
35