Log Messages; Table 45 Log Messages - ZyXEL Communications NSA-220 User Manual

Table 44 Log Severity Levels (continued)
LEVEL
4
5
6

11.5 Log Messages

Here are some example log messages.

Table 45 Log Messages

CLASS
Network
Network
Network
Network
Network
Network
Network
Network
Network
Network
Network
Network
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
Services
NSA-220 User's Guide
DESCRIPTION
Warning
Notice
Info
SEVERITY MESSAGE
NOTICE %s is active because of changing Port Group. Enable DHCP client.
NOTICE %s is inactive because of changing Port Group. Disable DHCP
client.
NOTICE %s MTU > (%s MTU - 8), %s may not work correctly.
NOTICE (%s MTU - 8) < %s MTU, %s may not work correctly.
NOTICE Add interface %s.
NOTICE Because %s link down. Default route will not apply until %s link up.
NOTICE Because base interface %s will be disabled.Interface %s is disabled
now., base_ud_iface
NOTICE Network Config setting is changed
NOTICE Interface %s was disabled.
NOTICE Interface %s was enabled.
NOTICE Port Group on %s is changed. Renew DHCP client.
NOTICE show_sdx
INFO admin has changed the password
INFO HTTP management port has changed to %s
INFO Clock has disable daylight saving
INFO MyClock has enable daylight saving
INFO MyClock has set timezone to %s
INFO MyClock has set timezone to default
INFO The date and time are updated from NTP server.
INFO The date and time are updated manually.
INFO The time is updated manually.
NOTICE MyClock has changed daylight saving interval
NOTICE MyClock has disabled daylight saving interval
NOTICE NTP server has set to '%s'
NOTICE NTP server has set to null
NOTICE The NTP service is disabled.
NOTICE The NTP service is enabled.
WARNING Reaching Maximum Allowed Rules
Chapter 11 Maintenance Screens
129