Using The Simulscope With Harvey, The Cardiology Patient Manikin - Cardionics SimulScope Operator's Manual

3.3.2 Using the SimulScope with Harvey, the Cardiology Patient Manikin (a product of the
University of Miami).
Connect the sounds output of Harvey, located on the lower right side of the Harvey cabinet to the
Stethoscope Input of the SimulScope located on the rear panel of the SimulScope. Use Cardionics cable,
Cat. No,. 711-0254 Turn ON a sound from Harvey, then turn the SimulScope ON and operate it as you
would with a patient.
Figure 16 Frequency of sounds in Hertz
18