Using The Heartman Infrared Headphone - Cardionics SimulScope Operator's Manual

With the StethView Digital Recording System installed on a PC or laptop, set the system for two channels.
Refer to Section 2.4 of the StethView Operator's Manual. On the Main Menu of the StethView, locate the
Options tab. There is a Pull-Down Menu. Select "Number of Channels". Select two (2) channels.
Set up for Play back.
Refer to the Playback section of Figure 11. Connect the Audio Interface Module to the Stethoscope input
on the rear panel of the SimulScope. Using the StethView Digital Recording System software, play the
sounds and ECG. You will hear the sounds while wearing a HeartMan Infrared Headphone (supplied with
the SimulScope) and view the ECG on the PC or laptop from the StethView screen.
12