About Wireless Security; About Certificates - Honeywell Thor VM3A User Manual

1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the name of the VPN in the list.
4. Enter any necessary credentials when prompted.
5. Tap Connect.
Edit VPN Information
Editing an existing VPN profile be done from the VPN screen.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap and hold the name of the VPN in the list.
4. Tap
5. Edit the VPN settings as necessary.
6. When you are done, tap Save.

About Wireless Security

The computer provides these security solutions for your wireless network:
•
•
•
Honeywell recommends WPA2 security with PSK (Personal) or 802.1x (Enterprise)
key management.
Before you set security, you need to enable the radio, set the date, and set the SSID
on your computer. To use 802.1x security, you need to load a root certificate on
your computer. To use transport layer security (TLS) with 802.1x security, you also
need to load a user certificate.
Use the Settings app to access and configure all wireless security settings.

About Certificates

You can use digital certificates to identify the computer for network access or
authentication to servers. To use a certificate to identify your device, you must
install it in the trusted credential storage on the computer.
46
> Network & Internet > VPN.
A appears in the status bar and a notification is received.
To disconnect from the VPN, tap the notification.
> Network & Internet > VPN.
to the right of the VPN profile you want to edit.
Wi-Fi Protected Access 2 (WPA2™)
Wi-Fi Protected Access (WPA)
802.1x
Thor VM3A Vehicle-Mounted Computer