Ikelite 4102.15 Instruction Manual page 2

CONNECT THE CORD
The Extension Cord features one male and one female end.
Select the appropriate end when connecting between the two Ikelite
products.
1. Make sure all components are dry.
2. Clean and lightly lubricate the male stem o-rings and female
connector threads. Check the o-rings for nicks or cuts.
3. Note the positioning of the receptacles and pins. Properly
align the end of the male connectors and insert into the
female connectors.
4. Hand-tighten the knurled rings on the male connectors.
5. Push each male connector body further into the female
connector and continue to tighten the knurled ring.
MALE
2
Stem O' r i ng
Retai ni ng
Ri ng
FEMALE