Advertisement
Quick Links
4102.15 15-foot Extension Cord
I n s t r u c t i o n M a n u a l
Extend the original photo sync cord length by using the Ikelite
Extension Cord. The Extension Cord features one male and one
female Ikelite 5-pin connector to secure between the following
Ikelite photographic products. The strobe can be fired in TTL/auto
and manual exposure modes.
Ikelite Extension Cord Can Be Used:
Between Strobe and Sync Cord
Between DS Strobe and Sync Cord
Between Camera Housing and Sync Cord
Between EV-Controller and DS Strobe
Between Pro Video-Lite Head and Battery Pack
Between SpD Lite Head and Battery Pack
Note: Please read all instructions before using this product.
Advertisement
Related Manuals for Ikelite 4102.15
Summary of Contents for Ikelite 4102.15
- Page 1 4102.15 15-foot Extension Cord I n s t r u c t i o n M a n u a l Extend the original photo sync cord length by using the Ikelite Extension Cord. The Extension Cord features one male and one female Ikelite 5-pin connector to secure between the following Ikelite photographic products.
- Page 2 CONNECT THE CORD The Extension Cord features one male and one female end. Select the appropriate end when connecting between the two Ikelite products. 1. Make sure all components are dry. 2. Clean and lightly lubricate the male stem o-rings and female connector threads.
- Page 3 DO NOT use the Extension Cord with the Ikelite Pro Video-Lite or SpD cave light if the battery pack is secured to the diver because of the potentially dangerous situation described above.
- Page 4 Ikelite product. Returning Products for Service Ikelite is most interested in preforming any service to assure that all products perform as intended. For repair or service, return the product to the address below with your name, address, phone number and a brief description of the problem.