Empire Comfort Systems EBL34 Owner's Manual page 14

Fireplace Installation
3. Lift fireplace and insert into opening.
The fireplace's mounting trim should
be flush against the wall (Figure 9).
4. Use the supplied bubble level
to level the fireplace within the
framing, adjust as required.
5. Drive four supplied mounting
screws through the four mounting
holes located on the inside surface
of the fireplace chassis, into wall
studs (Figure 10).
6. Refer to Front Glass Installation
section for final installation
procedures.
14
Figure 10
Wall
surface
Mounting hole
www.empirecomfort.com
Mounting hole