DAMAGE – SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement .
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer .
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made by
arrangement between customer and installer .
MOUNTING SPACE
66" or more
from the
floor to the
top of the
hood
NOTES:
• Hood width may be greater than the width of the range
or cooktop, but it may not be smaller .
• Ensure the range or cooktop is installed per
manufacturer's installation instructions .
• If you are going to vent your range hood to the outside,
see the "Ducting Requirements" section for exhaust duct
preparation .
Installation Instructions
Bottom edge of
cabinet needs
to be 30" or
more from
the cooking
surface
30"
min .
8
TOOLS YOU WILL NEED
Flat-blade and Phillips
screwdrivers
Saw (saber or
keyhole)
Pliers
1/4"
pivoting
hex socket
Flashlight
Caulking
PARTS INCLUDED
PART
Grease Filter
Charcoal Filter
Mounting Screws
(8 - 18" x 3/4" Phillips pan
head)
Exhaust Adaptor
" x 10" rect . venting)
(for 3
⁄
1
4
Exhaust Adaptor Screw
(8 - 18" x 3/8" Phillips pan
head or hex head)
Pencil
Duct tape
Electric drill
Metal snips
(in some
applications)
Tape measure
Wire stripper
Level
1/4" Nutdriver
QUANTITY
1
1
4
1
1