Related Manuals for ScatterBox POE Series
Summary of Contents for ScatterBox POE Series
- Page 1 Instruction Manual POE304-524 User Manual Switch Range Gigabit Speeds High Load Capacity Virtual LAN (VLAN) Multiple Uplinks Vol 1 Ver 1 xPOE304-524...
-
Page 2: User Information
Introduction User Information The Scatterbox range of PoE switches are great for distributing IP camera signals The PoE Switch must be installed in a across a network. clean, dry environment where it will A PoE switch is a network switch which not be exposed to high temperatures, has power over Ethernet built-in. -
Page 3: Contents & Accessories
Contents & Accessories PoE Switch Models Setup Options Features Trouble Shooting Specifications Accessories Included To make the installation as easy as possible our PoE switches is supplied with a power lead and the larger units include mounting brackets. Power Lead Mounting Brackets So that the PoE switch is ready to use right The POE516 and POE524 are supplied with... - Page 4 PoE Switch Models POE304 4 RJ45 Down links 10 / 100Mbps 2 RJ45 Up links 10 / 100Mbps POE308 8 RJ45 Down links 10 / 100Mbps 2 RJ45 Up links 10 / 100Mbps POE504 4 RJ45 Down links 10 / 100 / 1000Mbps 2 RJ45 Up links 10 / 100 / 1000Mbps 1 SFP Up links...
-
Page 5: Setup Options
Setup Options The Switches have different uses and setup options. Including providing power to PoE Cameras, and providing network access to devices like computers. Option 1 Power IP Cameras using PoE, and then these cameras can then connect to the relevant network video recorder or to a network infrastructure. -
Page 6: Led Status Indicators
Features LED Status Indicators Condition Status The switch is receiving power Power The switch is not receiving power The port is connected LINK/ACT No connection to the port Flashing The port is transmitting or receiving data The port is linked and providing power to a device The is not providing power to a device A small transceiver that plugs into the port of a network switch and... -
Page 7: Troubleshooting
Trouble Shooting The table below describes common problems you may encounter when using a ScatterBox PoE switch along with the most common solutions for rectifying the problem. Problem Possible Cause Solution No Power light on Power to the device Check power to device from external source. Check that the power Switch lead (IEC lead) is plugged in. -
Page 8: Specifications
Specifications Standard Switches Feature POE304 POE308 Downlinks 4 x RJ45 8 x RJ45 Uplinks 2 x RJ45 (Max per port) Power 120W (Whole device maximum) (Whole device maximum) Bandwidth 10Mbps / 100Mbps Internal Use Only Working Temperature 0°C ~ 40°C Mount Wall Mount (Brackets supplied)