Power Supply; Set-Up - Revo PIXIS RX Owner's Manual

POWER SUPPLY (PSU)
Your PiXiS RX radio is supplied with a multi-region power supply,
meaning that it can be operated in a number of countries around
the world.
Simply choose the correct adaptor for your country from the
selection supplied, then follow the instructions below.

SET-UP

Using the PSU supplied, connect one end to the DC power socket found on the
1
rear of your radio, then plug the opposite end into the mains socket on the wall.
2 Fully extend the antenna for DAB or FM operation
3 Press the POWER button once to launch Setup Wizard.
MODE
POWER
05