Objecto FLOW F1 User Manual page 5

Main unit operation unit
Remote control
Manual operation button
The functions of the buttons on the main unit and the remote control are
the same.
(A) Power button
Start / stop operation.
(When all lamps are lit, the fan is in "turbo" mode with the strongest air
fl ow)
(B) Air fl ow button
Adjust the air fl ow during operation.
(C) Oscillate button
Start / stop Oscillate operation.
(D) Timer button
Set the on / off timer time.
(E) Rhythm / Night-time air fl ow button
Switch between Rhythm and Night-time air fl ow functions.
* Press and hold (3 seconds or more) to set the lamp
(F) Transmitter (remote control only)
Use by pointing at the remote control receiver on the main unit.
Operating lamp
You can check the current operating status.
①
Air fl ow lamp
Indicates the operating air fl ow. During operation, one to four air fl ow lamps
will be lit.
(When all lamps are lit, the fan is in "turbo" mode with the strongest air fl ow)
②
Oscillate lamp
Lit during Oscillate operation.
③
Timer lamp
Lit when the on / off timer is set.
(When lamp is lit red: On timer When lamp is lit green: Off timer)
④
Rhythm (green) / Night-time air fl ow (red) lamp
The lamp lights green for Rhythm, and red for Night-time air fl ow.
③
5
English
④
(A)
(E)
(B)
①
(C)
(D)
②
(F)
to Dimming mode.