Adjust The Angle - Objecto FLOW F1 User Manual

3. Cancel the ON Timer
Press the timer button on the main unit or the remote control several times to
turn off the timer lamp.

Adjust the Angle

Support the handle, push the top or bottom of the front guard, and
slowly move the fan up or down.
• Before adjusting the angle, be sure to stop operation and check that the blades
have stopped.
• Adjust while pressing with one hand so that the main unit does not fall.
Downward
You can adjust the angle
up to about 45°
Front
Using as a Circulator
If you use the fan together with an air conditioner to circulate the indoor
air, it will improve the effectiveness of the air conditioner.
Carrying
When moving, be sure to move the fan while holding the handle.
Upward
You can adjust the angle
up to about 90°
Handle
Front
Rear
10
Rear
English