Advertisement
Atomic Digital Wall Clock has distorted or frozen display
Explanation: On a brand new wall clock, check for thin plastic film of printed scratch guard that may be on
the screen of the wall clock. This thin piece of plastic has printed numbers for store displays. When the
batteries are installed, the "real" numbers show behind the printed scratch guard and create distortion.
With all power removed, the wall clock should be blank.
If numbers still appear, please check for scratch guard.
Power:
Check that the batteries are installed correctly.
This is generally a power related issue.
Batteries
may be overpowered or underpowered.
Remove batteries from wall clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert batteries into the wall clock.
Atomic Digital Wall Clock is blank: No letters, numbers or dashed lines
Check that the batteries are installed correctly.
Batteries
may be overpowered or underpowered.
Remove batteries from wall clock.
Press any button 20 times. Leave the batteries out of the display for 2 hours.
Insert batteries into the wall clock.
Atomic Digital Wall Clock drains batteries quickly
Test a new set of alkaline batteries. Write down the date of installation and the voltage of the batteries.
When the batteries fail, please note the date and voltage again. This is helpful in determining the problem.
Check for leaking batteries, which may damage the wall clock.
Battery life is over 12 months when using reputable battery brands.
Atomic Digital Wall Clock has missing segments
Explanation: When parts of numbers, letters, or pictures are missing on the display, it is often power related.
Batteries
may be overpowered or underpowered. Remove batteries from wall clock.
Press any button 20 times. Leave the wall clock unpowered for 1-2 hours.
Install fresh alkaline batteries with correct polarity.
La Crosse Technology, Ltd
Page 4
Advertisement
