Advertisement
12/24-HOUR TIME: 12h or 24h will flash. Press and release the WAVE/+ button to select 12-hour or 24-
hour time format. Press and release the SET button to confirm and set the hour.
HOUR: The hour will flash. Press and release the WAVE/+ button to select the hour. Press and release the
SET button to confirm and set the minutes.
MINUTES: The minutes will flash. Press and release the WAVE/+ button to select the minutes. Press and
release the SET button to confirm and select the year.
YEAR: The year will flash. Press and release the WAVE/+ button to select the year. Press and release the
SET button to confirm and set the month. (Year will only show during setup).
MONTH: The month will flash. Press and release the WAVE/+ button to select the month. Press and
release the SET button to confirm set the date.
DATE: The date will flash. Press and release the WAVE/+ button to select the date. (The weekday will set
automatically). Press and release the SET button to confirm and exit.
Does the clock have a backlight?
No this clock does not have a backlight.
How tall are the Time Numbers?
The time numbers are 4 inches tall.
No WWVB Tower Icon
The Atomic Digital Wall Clock has not received a WWVB time signal in the past 24 hours.
Position
the Atomic Digital Wall Clock for better reception.
Hold the WAVE/+ button to send the Atomic Digital Wall Clock on a WWVB signal search at night.
Allow up to 5 nights to receive the time signal.
Set Time Alarm
Press and release the SET button once to enter Alarm Mode. The letters AL will show in the seconds display.
1.
HOUR: Hold the SET button for 3 seconds. The hour will flash. Press and release the WAVE/+ button to
select the hour. Press and release the SET button to confirm and set the minutes.
2.
MINUTES: The minutes will flash. Press and release the WAVE/+ button to select the minutes. Press and
release the SET button to confirm and exit.
Activate/Deactivate Time Alarm
ACTIVATE:
In Alarm Mode press and release the WAVE/+ or DST/- button to switch the alarm on or off.
When the alarm is ON the alarm icon will appear between the hours and the minutes.
DEACTIVATE:
In Alarm Mode press and release the WAVE/+ or DST/- button to switch the alarm on or off.
When the alarm is OFF the icon will disappear.
Snooze Alarm
When the alarm sounds, press the SNOOZE button and the alarm will become silent for 5 minutes.
The snooze icon will flash when the snooze function is active.
While the snooze feature is active, press any button other than SNOOZE to deactivate the snooze function.
The snooze icon will disappear.
Atomic Digital Wall Clock is dim
Explanation: Most wall clocks have a gray background. Place the wall clock at eye level, to determine if it is
dim. Wall clocks that sit in the sunlight can develop a cloudy film over time.
This is generally a power related issue.
Batteries
may be overpowered or underpowered. Remove batteries from wall clock.
Press any button 20 times. Leave the wall clock unpowered for 1-2 hours.
Install fresh alkaline batteries with correct polarity.
La Crosse Technology, Ltd
Page 3
Advertisement
