Setting Interface; Audio Settings; Display Settings - Peiying PY9909.2 Owner's Manual

Bluetooth
Prior to use via Bluetooth, pair the radio with an external Bluetooth device. To pair the radio with an
external device:
1. Enter Bluetooth mode from the main screen.
2. Enable Bluetooth function on your external device. Remember to enable its visibility.
3. Conduct pairing on the external device. Input default password if necessary: 0000.
Once connected, press one of the icons to perform desired action/enter/enable:
Dial interface (during call, user can mute the microphone and switch between radio and
phone)
Calls records
Phonebook (by default, the phonebook is not loaded into the radio. Press
contacts. Please note, the phone may ask you to confirm whether to allow radio to see
contacts. Press
BT music (press to enter audio streaming interface. Please note, you have to start music
playback from the external device first to manage the playback.)
BT connection settings

Setting interface

Enter Setup tab to manage your device. Touch one of the icons on the bottom tab to enter:
• System settings
• Area (select appropriate)
• Language (select appropriate)
• Rear camera (on/off)
• Headlamp detection (on/off)
• Brake detection (on/off)
• Subwoofer (on/off)
• Beep (on/off)
EN
•

Audio settings

• EQ (select appropriate)
• Field (adjust appropriately)
• Loudness (on/off)
•

Display settings

• Type (select appropriate)
• Adjust (adjust appropriately)
24
Owner's manual
to open the keypad to search a record.)
to load the