Custom Date Display; Position Clock; Digital Clock Has Distorted Or Frozen Display; Digital Clock Is Blank: No Letters, Numbers Or Dashed Lines - La Crosse Technology 515-1912 Faqs

Timer Sounds
• When count down reaches 0, the timer will sound 5 beeps every 15 seconds for up to 1
minute.
• The timer to be at 72db heard from 1 foot away from the front of the clock.
• The timer icon.

Custom Date Display

Indoor Temperature & Seconds or Outdoor Temperature/Humidity Display:
• Press the MINUS (-) button to toggle between Indoor Temperature & Seconds
Counting and Outdoor Temperature/Humidity Display.

Position Clock

• Use the slot on the battery cover to mount your clock with a screw, or insert the suction
cup attachment into the slot and mount on a clean, smooth surface.
• When using suction cup, occasionally press and hold the clock to be sure it is secure.
Position the digital clock for better Atomic Time Signal reception. The front or back
•
should face toward Colorado.

Digital clock has distorted or frozen display

Explanation: On a brand new digital clock, check for thin plastic film of printed scratch
guard that may be on the screen of the digital clock. This thin piece of plastic has printed
numbers for store displays. When the batteries are installed, the "real" numbers show
behind the printed scratch guard and create distortion.
• With all power removed, the digital clock should be blank.
• If numbers still appear, please check for scratch guard.
Power:
• Check that the batteries are installed correctly.
• This is generally a power related issue.
Batteries may be overpowered or underpowered.
•
• Remove batteries from digital clock.
• Press any button 20 times. Leave the batteries out of the display for 2 hours.
• Insert batteries into the digital clock.

Digital clock is blank: No letters, numbers or dashed lines

• Check that the batteries are installed correctly.
Batteries may be overpowered or underpowered.
•
• Remove batteries from digital clock.
• Press any button 20 times. Leave the batteries out of the display for 2 hours.
• Insert batteries into the digital clock.

Day of the week is incorrect.

La Crosse Technology, Ltd Page 9