Conformity; Disposal Information - Flex TJ 10.8/18.0 Manual

429.724_Akku-Heizjacke TJ_Rev_03.book Seite 15 Montag, 23. November 2015 8:09 08
TJ 10.8/18.0
CAUTION!
Follow the cleaning instructions on the label
in the heated jacket.
Do not dry-clean the heated jacket. Do
–
not bleach.
Do not iron the heated jacket.
–
 Wash the heated jacket with a
particularly gentle wash cycle (delicates
or wool wash cycle).
 Dry in a tumble drier with a particularly
gentle cycle at low temperature.
Storing
 Leave the garment to cool down
completely before you store it.
 Remove battery pack and power adapter
before storing.
 Before storing, install the cover over the
power cable.
 To avoid making sharp bends in the gar-
ment, do not place any objects on top of
it whilst storing.
NOTE
If the batteries are not used for a prolonged
period, store batteries partially charged and
in a cool location.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
Other accessories can be found in
the manufacturer's catalogues. Exploded
drawings and spare-part lists can be found
on our homepage:
www.flex-tools.com

conformity

We declare on our sole responsibility that
the product described in "Technical
specifications" conforms to the following
standards or normative documents:
EN 60335, EN 55014 according to the
provisions of Directives 2004/108/EC
(until 19.04.2016), 2014/30/EU (from
20.04.2016), 2006/95/EC (until
19.04.2016), 2014/35/EU (from
20.04.2016), 2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle Klaus Peter Weinper
Manager Research &
Head of Quality
Development (R & D)
Department (QD)
19.11.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr

Disposal information

EU countries only
Do not dispose of electric power tools in
the household waste! In accordance with
the European Directive 2012/19/EC on Waste
Electrical and Electronic Equipment and its
incorporation into national law used electric
power tools must be collected separately and
recycled in an environmentally friendly
manner.
Recycling raw materials instead of
waste disposal.
Device, accessories and packaging should be
recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
15