Instructions For Use; Maintenance And Care - Flex TJ 10.8/18.0 Manual

429.724_Akku-Heizjacke TJ_Rev_03.book Seite 14 Montag, 23. November 2015 8:09 08

Instructions for use

NOTE
Follow the instructions for charging the
battery in the operating instructions for the
battery charger.
 Press the charged battery into the
adapter until it snaps fully into place.
 Insert the DC plug of the heated jacket into
the adapter's DC connecting socket (1.).
 Place the adapter and battery in the
pocket (2.) or secure to the belt with the
adapter belt clip.
 Switch on the heated jacket. To do so,
press and hold down the ON/OFF button.
The heated jacket starts to heat at the
lowest setting. The LED lights up blue.
14
 Press the ON/OFF button briefly several
times to change the heat setting.
– Press briefly 1x:
medium heat setting (LED lights up white)
– Press briefly 2x:
high heat setting (LED lights up orange)
– Press briefly 3x:
highest heat setting (rapid heating,
LED lights up red)
NOTE
During operation at the highest heat setting
(LED lights up red) the heating auto-
matically switches after 30 minutes to the
lowest setting (LED blue).
WARNING!
For a planned continuous operation select
the middle heat setting so as to avoid
overheating the body.
 To switch off the heating, press and hold
down the ON/OFF button until the LED
goes out.

Maintenance and care

WARNING!
Before carrying out work of any kind
(cleaning, transport, storage), remove the
battery from the adapter.
Check at regular intervals whether the
garment is showing signs of wear or
damage. If such signs are present or if the
garment has been used improperly, do not
use the garment again and return it to the
retailer.
Cleaning
WARNING!
Remove battery pack and power
–
adapter before washing.
Before washing, install the cover over
–
the power cable.
Insure power cable is contained in
–
battery pocket before washing.
Empty all the jacket pockets so as to
–
avoid damaging the heating elements
and connecting cables.
TJ 10.8/18.0