Safety Information - Husky 935 263 Use And Care Manual

Safety Information

PLEASE READ AND SAVE THESE INSTRUCTIONS
CAUTION: Read, understand, and follow all safety
rules and instructions before using this tool. These
safety instructions should be followed at all times.
Failing to follow these safety instructions could result
in injury to yourself or others. Also, failing to read and
follow these instructions may cause damage to your
equipment.
IMPORTANT LASER PRECAUTIONS
WARNING: Be sure to read and understand all
instructions in this manual before using this product.
Failing to follow all instructions may result in hazardous
radiation exposure.
CAUTION: DO NOT attempt to modify the
performance of the laser device in any way. This may
result in dangerous exposure to laser radiation.
CAUTION: The use of optical instruments with this
product will increase eye hazard.
IMPORTANT: The following labels are on your
tool. They indicate where the laser light is emitted by
the level. ALWAYS BE AWARE of the location of laser
aperture when using the laser level. ALWAYS MAKE
SURE that any bystanders in the vicinity are made aware
of the dangers of looking directly into the laser.
CAUTION
LASER RADIATION–
DO NOT STARE INTO BEAM
Maximum output
power < 1mw,
650nm, class II laser product
Complies with 21 CFR parts
1040.10 and 1040.11
3V 2X1.5V AAA
935 263
SERIAL NO.
MADE IN CHINA
WARNING: LASER LIGHT. LASER RADIATION. Avoid
Direct Eye Exposure. DO NOT stare into the beam.
AVOID EXPOSURE –
LASER RADIATION IS EMITTED
FROM THIS APERTURE
WARNING: DO NOT remove or deface any product
labels. Removing product labels increases the risk of
exposure to laser radiation.
WARNING: Use of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous radiation exposure.
WARNING: DO NOT stare directly at the laser beam
or project the laser beam directly into the eyes of
others. Serious eye injury could result.
WARNING: DO NOT place the laser level in a position
that may cause anyone to stare into the laser beam
intentionally or unintentionally. Serious eye injury
could result.
WARNING: DO NOT set up the laser level at eye level
or operate the level near a refl ective surface – the
laser beam could be projected into your eyes or into the
eyes of others.
WARNING: DO NOT attempt to view the laser beam
through optical tools such as telescopes or transits.
Serious eye injury could result.
WARNING: DO NOT operate the laser level around
children or allow children to operate the tool. Serious
eye injury could result.
WARNING: ALWAYS turn the laser "OFF" when not
in use. Leaving the tool "ON" will increase the risk of
someone inadvertently staring into the laser beam.
WARNING: DO NOT operate the tool in combustible
areas such as in the presence of fl ammable liquids,
gases, or dust.
WARNING: DO NOT use this laser level for any
purpose other than those outlined in this manual. This
could result in serious injury.
WARNING: DO NOT leave the laser level "ON" and
unattended.