Advertisement
Available languages
Available languages
center and drill after that (see fig. 13). Caution: drill tiles
in the impactless drilling operation mode only.
Power tool maintenance / preventive
measures
Before carrying out any works on the power tool it
must be disconnected from the mains.
The power tool lubricant quantity has to be checked on
a regular basis after every 3 hours of operation, as well
as after replacing the carbon brushes� In order to do
that, use flange wrench 15 to release cap 9, check the
lubricant quantity and add it, if needed� Greases with a
boiling point over 390°С are to be used.
Cleaning of the power tool
An indispensable condition for a safe long-term
exploitation of the power tool is to keep it clean�
Regularly flush the power tool with compressed air
thought the ventilation slots 10�
After-sales service and application service
Our after-sales service responds to your questions
concerning
maintenance
The manufacturer reserves the possibility to introduce changes.
and
repair
of
your
English
product as well as spare parts� Information about
service centers, parts diagrams and information
about spare parts can also be found under:
www.crown-tools.com�
Transportation of the power tools
• Categorically not to drop any mechanical impact on
the packaging during transport�
• When unloading / loading is not allowed to use
any kind of technology that works on the principle of
clamping packaging�
Environmental protection
Recycle
disposing as waste.
Power tool, accessories and packaging should
be sorted for environment-friendly recycling�
The plastic components are labelled for categorized
recycling�
These instructions are printed on recycled paper
manufactured without chlorine�
23
raw
materials
instead
of
Advertisement
