ADJUSTMENT OF THE RUNNING BELT
1. Use the 6mm inner hexagonal wrench for the screw on the left side of the running belt and rotate it
clockwise in 1/4 steps.
2. Repeat this step for the opposite side.
and the running belt, since it increases the pressure of the front and rear rollers.
Adjust the running belt in the middle:
1. Start the treadmill with no loading with the speed of 6km/h and let it run.
2. If the belt is turnin to the left side, screw the screw in 1/4 steps clockwise. If it turns to the right side,
screw the screw counterclockwise in 1/4 steps.
3. Repeat this process until the belt is running in the middle.
3. Please note. The running belt can't be adjusted to tightly. It can cause a damage off the treadmill
74