Model Mm20 - Dremel MULTI-MAX MM20 Original Instructions Manual

of moving parts, breakage of parts and any other
condition that may affect the power tools operation. if
damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f. keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g. use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
BattErY tOOl usE anD carE
a. recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
battery pack.
b. use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
c. when battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d. under abusive conditions, liquid may be ejected from
the battery; avoid contact. if contact accidentally occurs,
flush with water. if liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
sErVicE
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
MacHinE-sPEcific safEtY
warnings
a. use the machine only for dry sanding. Penetration of water
into the machine increases the risk of an electric shock.
b. keep hands away from the sawing range. Do not reach
under the workpiece. Contact with the saw blade can lead
to injuries.
c. use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property damage
or may cause an electric shock.
d. when working with the machine, always hold it firmly
with both hands and provide for a secure stance. The
power tool is guided more secure with both hands.
e. secure the workpiece. A workpiece clamped with clamping
devices or in a vice is held more secure than by hand.
f. keep your workplace clean. Blends of materials are
particularly dangerous. Dust from light alloys can burn or
explode.
g. avoid unintentional switching on. Ensure the On/Off
switch is in the off position before inserting battery pack.
Carrying the power tool with your finger on the On/Off switch
or inserting the battery pack into power tools that have the
switch on invites accidents.
h. wear protective gloves when changing application tools/
accessories. Application tools/accessories become hot after
prolonged usage.
i. Do not scrape wetted materials (e. g. wallpaper) or on
moist surfaces. Penetration of water into the machine
increases the risk of an electric shock.
j. Do not treat the surface to be worked with solvent-
containing fluids. Materials being warmed up by the
scraping can cause toxic vapours to develop.
k. Exercise extreme caution when handling the scraper. The
accessory is very sharp; danger of injury.
DO nOt wOrk witH MatErials
WARNING
!
cOntaining asBEstOs (asBEstOs is
cOnsiDErED carcinOgEnic).
takE PrOtEctiVE MEasurEs wHEn
WARNING
!
During wOrk Dust can DEVElOP
tHat is HarMful tO OnE's HEaltH, cOMBustiBlE Or
ExPlOsiVE (sOME Dusts arE cOnsiDErED carcinOgEnic);
wEar a Dust Mask anD wOrk witH Dust/ cHiP
ExtractiOn wHEn cOnnEctaBlE.
EnVirOnMEnt
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
OnlY fOr EurOPEan cOuntriEs
Do not dispose of power tools into household waste!
According the European Guideline 2002/96/EC for
Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are
no longer usable must be collected separately and
disposed of in an environmentally correct manner.
sPEcificatiOns
gEnEral sPEcificatiOns
Dremel Multi-Max corded Oscillating Multi-tool

Model MM20

Voltage Rating:
Wattage Rating:
No Load Speed:
Oscillation Angle, left/right: 1,5°
Weight:
9
DisPOsal
220V-240V ~ 50/60Hz
250W
n(o) 10000-21000 min-1
1.35 kg