Other Settings - KRUG+PRIESTER IDEAL AP35 Operating Instructions Manual

Other Settings

BUTTON LOCK
• The device is in the FAN SPEED mode.
- Keep the FAN SPEED button pressed for at least 3 seconds.
> All LEDs fl ash twice, the button lock is activated (on tapping the buttons, two audible
signals are heard and all the LEDs flash twice).
- Keep the FAN SPEED button pressed for at least 3 seconds to deactivate the button lock.
Setting the bleep
1. The air purifier finds itself in the standby mode (all function displays are switched off) once
the mains plug is plugged in.
> When the device is in operation, press the ON/OFF button to switch it off.
2. Keep the ON/OFF button pressed for 3 seconds under OFF to switch the bleep on or off.
36