Set Up - Zenoah BT251 Owner's/Operator's Manual

6. Set up

SE1
SE2
SE3
INSTALLING HANDLE (SE1)
• Mount the handle to the shaft tube and clamp it
at your best operating position.
INSTALLING DEBRIS GUARD (SE2)
• Put the debris guard on the bearing case, attach
it with the screw, washer, nut and support plate
(1)
provided.
(1) Support plate
INSTALLING CUTTING HEAD (SE3)
1. While locking the gear shaft by inserting the
attached hexagon bar into the upper holder and
the housing.
2. Rotate the cutting head to engage threads.
Hand-tighten it securely.
11