RedMax PSZ2401, PSZ2401-CA Owner's Manual page 40

OP9
40
(1)
English
8. Operation
■ ADJUSTING IDLING SPEED (OP9)
1. When the engine tends stop frequently at idling
mode, turn the adjusting screw clockwise.
2. When the cutting head keeps rotating after releasing
the trigger, turn the adjusting screw counter-
clockwise.
(1) Idle adjusting screw
NOTE
• Warm up the engine before adjusting the idling
speed.
WARNING
• Always wear work gloves made of leather or
some other sturdy material when using the
polesaw.
• Falling branches may fall onto the face or into
the eyes, resulting in injuries, scratches, and
cuts, and for this reason you should always be
sure to wear a helmet and face protector when
using your polesaw.