The Floppy Disc Drive; The Cd Device - MAXDATA PRO 660T User Manual

The Floppy Disk Drive (FDD)
The computer is equipped with a fixed 1.44 MB, 3.5" floppy disk drive module.
By default it is drive "A:".
ATTENTION
Don't try to remove a floppy disk
while the system is accessing it. This
may cause the computer to "crash" and
damage your data.
When using the floppy drive, always insert your floppy diskette with the label-
side facing up. To remove the inserted diskette, press the eject button on the
top-right corner of the floppy drive.

The CD Device

To insert a CD disk, press the Open
Button and carefully place a CD
disk onto the Disc tray with label-
side facing up.
Push the CD tray in until its lock
"clicks" and you are ready to start.
The Busy Indicator will light up
while data is being accessed or
while an audio CD is playing. If
power is unexpectedly interrupted,
insert an object such as a
straightened paper clip into the
emergency eject hole to open the
tray.
Figure 14
Figure 15
INTRODUCTION
57