Tentipi Porch Quick Manual

Porch
Attach the porch's Velcro strip to
the Nordic tipi's accessory sleeve.
Push the Velcro strips firmly all the
way to the edges.
Place the ends of the pole into
their respective pole pockets.
Adjust the strap.
Extend the porch, fix it to the ground and position the storm cords. Tighten straps and storm cords. Pegs and straps may need to be adjusted
so the porch fits snugly against the Nordic tipi.
Before using the product, please read "Care instructions, hints and advice" at tentipi.com/support
Extend the band* at the corner of
the porch and attach it to the Nordic
tipi's storm cord fastenings ...
Adjust the tent peg catch strap to the desired length and peg the porch to the ground at both ends of the
pole. Use the measuring cord to get the correct distance between the pegs.
... by pushing the toggle through
the hole and locking it with the
ring. Likewise on the other side.
Assemble the pole and push it
into its channel.
*On size 7, the band
at the corner is only
attached to one storm
cord fastening.
www.tentipi.com