Infinity Ezzy Sails Tuning Manual page 4

7) Tension the batten.
8) Re-tension downhaul (see #6 above).
9) Adjust the outhaul so that the batten above the
boom is not touching the mast when it rotates. For
strong winds, outhaul until the batten above the
boom is resting directly behind the mast.
To increase the life of your sail, it is recommended that you de-rig in the following order:
1)
Release batten tension (pushing the release lever located on the center of the buckle) and tack-strap.
2)
Release downhaul.
3)
Snap cam off mast.
4)
Release outhaul and remove boom.
5)
Slide mast out of luff sleeve without creasing sail.
6)
Roll the sail from the top tightly, to prevent creasing,
Rigging a 1996 Ezzy Transformer Wave / Bump & Jump Sail
De-Rigging
Page 4