Injection Time Deviation Map; Map Correction Map (Autoadaptation Map) - AC STAG-4 QBOX BASIC User Manual

2.18. Injection time deviation map

The "D" tab allows the viewer to view the difference between "Petrol" and "Gas" maps.
Differences between the petrol and gas injection time maps are expressed as a percentage.
Positive values on the deviation map indicate that the mixture is rich. Injection
times are shorter on the gas map than on the reference petrol map. Conversely,
negative values indicate leaning. It should be noted that particularly within the
low load and short petrol pulse range it is not recommended to seek deviations
close to zero, due to the natural distribution of petrol injection pulses as a result
of the ECU control.

2.19. MAP correction map (autoadaptation map)

Autoadaptation systems (available in STAG-4 QBOX/QNEXT PLUS, STAG-300 QMAX PLUS
controllers) are provided with dedicated maps of correction with rpm and load (MAP negative
pressure) axes to make the corrections more natural and precise. The map view can be accessed
through the "MAP correction Bx" tab. If autoadaptation is inactive, the map can be used for additional,
manual corrections of gas fuel dosing.
AC S.A. all rights reserved. Under penalty of law and/or liability claims it is forbidden to copy, publish, distribute, make available and/or use in any way all or any part of information contained
Fig. 46 Deviation map „D" view
Fig. 47 MAP correction map
within this document, in particular photographs, drawings, illustrations, trademarks, etc
49