Tüv Süd Functional Safety Certificate - Fagor QC-PDS Hardware Manual

•
Ii] . ·.
CERTIFICATE
No. Z10 080353 0008 Rev. 00
Holder of Certificate: Fagor Automation, S. Coop.
San Andres Auzoa, 19
20500 Arrasate - Mondragon
SPAIN
Factory(ies):
080353
Certification Mark:
Product:
Model(s):
Parameters:
Tested
according to:
Safety components
Safe Torque Off (STO)
QUERCUS QC-DR Servo Drives
Supply voltage:
Response.time STO:
Operating temperature:
24VDC ± 10%
<1ms
+5°C ... +45°C
The report and the user documentation in the
current valid revision are mandatory part of this
certificate. The product complies with the following
safety requirements only if the specifications documented
in the currently valid revision of this report are met.
The certified components are listed in report FA94809T
in the current valid revision.
IEC 61800-5-1:2007
IEC 61800-5-1 :2007/AMD1:2016
IEC 61800-5-2:2016
IEC 61508-1:2010 (SIL2)
IEC 61508-2:2010 (S1L2)
IEC 61508-4:2010 (S1L2)
EN ISO 13849-1 :2015 (Cat. 3, PL d)
~
\7
Product Service
The product was tested on a voluntary basis and complies with the essential requirements. The
certification mark shown above can be affixed on the product. It is not permitted to alter the
certification mark in any way. In addition the certification holder must not transfer the certificate to
third parties. See also notes overleaf.
Test report no.:
Valid until:
Date, 2020-02-20
Page 1 of 1
FA94777C
2025-02-19
TOV SOD Product Service GmbH • Certification Body • Ridlerstra~e 65 • 80339 Munich • Germany