Measure Signal - Sealey TA4000 Manual

Measure Signal

Cursor Menu
Select"Cursor" in main menu
1. Source
The user can set the source of the measurement to CH1, CH2, CH3,CH4 and MATH.
When you use cursors, be sure to set the Source to the waveform on the display that
you want to measure.
2. Type
There are four types of cursors: Cross, Trace, Vertical and Horizontal
1) Cross
The Cross cursors appear as cross lines on the display and measure the vertical and
horizontal parameters.
2
Original Language Version TA4000 Issue: 1 - 06/09/11