Sealey TA4000 Manual page 61

Trigger Type: Set the Trigger Type to Edge or Pulse.
PW Condition: Set the PW Condition to the following condition.
+More: +Pulse width more than selected pulse condition.
+Less: +Pulse width less than selected pulse condition.
+Equal: +Pulse width equal to selected pulse condition.
-More: -Pulse width more than selected pulse condition.
-Less: -Pulse width less than selected pulse condition.
-Equal: -Pulse width equal to selected pulse condition.
Pulse Width: The Pulse Width adjust range is 10ns~10s. When the condition is met, it
will trigger and acquire the waveform.
The user can also change the trigger setting on the trigger panel in the sidebar.

Original Language Version TA4000 Issue: 1 - 06/09/11