Front Panel - Zenith DVR313 Installation And Operating Manual

Front Panel

POWER button and indicator
Switches the DVD Recorder ON and OFF.
Lights blue when the DVD Recorder is turned on.
CHANNEL (+/-)
Scans up or down through
memorized channels.
Remote Sensor
Point the DVD Recorder remote
control here.
Shows the current status of the DVD Recorder.
10
Go to beginning of current chapter/ track
Press and hold for a fast reverse search.
REC (z) button and indicator
Starts recording. Press repeatedly
to set the recording time.
Lights red when the DVD Recorder
is in recording mode.
Pause playback or recording temporarily,
press again to exit pause mode.
OPEN/CLOSE (Z)
Opens or closes the disc tray.
Display window
Disc Tray
Insert a disc here.
Connect the DV output of a digital camcorder.
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
INPUT2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Go to NEXT chapter/track.
Press and hold for two seconds
for a fast forward search.
m/.
or to previous chapter/track.
STOP (x)
Stops playback or
recording.
PAUSE (X)
PLAY (N)
To play back a disc.
DV INPUT
S-V (S-Video) INPUT
>/M