Front Panel - Zenith RC59000M Installation And Operating Manual

Front Panel

POWER button and indicator
Switches the VCR/DVD Recorder ON and OFF.
Lights green when the VCR/DVD
OPEN/CLOSE (Z)
Opens or closes the disc tray.
Disc Tray (DVD deck)
Insert a disc here.
DV INPUT
Connect the DV output of a
digital camcorder.
S-VIDEO IN
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
AV2 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
DVD: Go to beginning of current chapter/track or to previous chapter/track.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
DVD: Go to NEXT chapter/track. Press and hold for two seconds for a fast forward search.
VCR: Advances the tape during the STOP mode or for fast forward picture search.
10
Recorder is turned on.
Cassette Compartment (VCR deck)
Display window
Shows the current status of
the VCR/DVD Recorder.
Point the VCR/DVD Recorder
COPY
Press to copy DVD to VCR
(or VCR to DVD).
CHANNEL (v / V)
Scans up or down
through memorized
channels.
Toggles control between the DVD
Ejects the tape in the VCR deck.
Insert a video cassette here.
Remote Sensor
remote control here.
REC (z) button
Starts recording. Press
repeatedly to set the
recording time.
PAUSE/STEP (X/C)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
Stops playback.
BACKWARD (./m)
Press and hold for a fast reverse search.
To play back a disc or tape.
DVD/VCR
deck and the VCR deck.
EJECT
STOP (x)
PLAY (N)
FORWARD (M/>)