Using The Built-In Tv Tuner; Changing Tv Channels; Changing Tv Audio Channel; Displaying Osd While Watching Tv - Zenith DVR313 Installation And Operating Manual

Using the Built-in TV Tuner

Changing TV Channels

If no disc is playing, you can change TV channels using
the number or CH (v / V) buttons on the remote control,
or the CH (+/–) buttons on the front panel.
ote
Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.

Changing TV Audio Channel

Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.
Press AUDIO repeatedly to change the TV audio.
Stereo → SAP → Mono → Stereo
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
• If the sound is of poor quality when set to Stereo, you
can often improve it by changing to Mono.
• When an external input is selected, the audio channel
can be switched only to Stereo.

Displaying OSD While Watching TV

Press ENTER to display/remove the information dis-
played on-screen.
Indicates channel number and audio signal
Disc type indicators
Video
Indicates current date and time.
received by the tuner.
CATV 11
MONO
2003-3-8 11:35am
29